The company successfully passed the TS16949 quality management system tracking review on June 24, 2014!

The company successfully passed the TS16949 quality management system tracking review on June 24, 2014! This indicates that the company's quality management level in the fields of design, manufacturing, sales and service has been further improved, and it has achieved synchronous integration with advanced enterprises in the automotive industry.

03-01

2018

The United States has become China's largest exporter of auto parts

Huicong Surface Treatment Network News: "In 2014, China's export of auto parts to the United States reached US $11.5 billion billion, more than double that of 2010." Wang Xia, chairman of the Auto Industry Committee of the China Council for the Promotion of International Trade, told reporters in Detroit that the United States has become China's largest export destination country for auto parts. China's automobile import and export show active development trend. In terms of auto parts, China's exports to the United States have more than doubled from US $5.37 billion in 2010 to US $11.5 billion in 2014, showing an increasing trend year by year. U.S. exports of parts to China were up from 2010.

01-08

2018

2014 Top 100 Global Auto Parts Supporting Suppliers Rankings

The Top 100 list comes out Automotive News of the United States ranks each year according to the supplier's previous year's automotive industry supporting market business operating income/sales. According to the performance in 2013, the list of the top 100 global parts suppliers in 2014 was published. Germany's Robert Bosch Group topped the top 100 list for four consecutive years, with electric equipment ranking second again and Magna reaching the top three. Among the top ten, the 4th to 10th places are: Continental, Aisin Seiko, Hyundai Mobis, Faurecia, Johnson Controls, ZF and Lear. Among them, Lear is the only newly promoted top 10, ranking 11th in 2013. More related

01-08

2018

Starting from December, auto parts will be subsidized by 10%

For the vast majority of Chinese consumers, the first choice for buying auto parts must be new products. However, the country is trying to change this perception and encourage the consumption of "remanufactured" products. Yesterday, the "remanufactured products into the auto parts city" promotion came to Hangzhou to introduce "remanufactured" products to auto parts manufacturers and consumers. The so-called "remanufacturing" refers to the use of high technology for specialized repair or upgrading to restore old mechanical and electrical products to the same mass manufacturing process as new products. Yesterday, at the "Remanufactured Products Entering Auto Parts City" promotion activity, Chinese auto workers

11-25

2014

Do you pay for "remanufacturing" auto parts? From December onwards, a 10% subsidy for "trade-in" will be launched.

For the vast majority of Chinese consumers, the first choice for buying auto parts must be new products. However, the country is trying to change this perception and encourage the consumption of "remanufactured" products. Yesterday, the promotion of "remanufactured products (auto parts) into the auto parts city" came to Hangzhou to introduce "remanufactured" products to auto parts manufacturers and consumers. The so-called "remanufacturing" refers to the use of high technology for specialized repair or upgrading to restore old mechanical and electrical products to the same mass manufacturing process as new products. Yesterday, "remanufactured products (auto parts) into the car

11-25

2014

Aluminum Alloy Gravity Casting Common Defects and Preventive Measures

1. shrinkage: this defect often occurs in the thick part of the casting, or the thickness of the junction. Sometimes the surface of the casting is white, which is actually shrinkage. Reasons: 1. Insufficient feeding of castings during crystallization; 2. The position of introducing alloy liquid is wrong; 3. The temperature of each part of the metal mold is inappropriate and does not conform to the principle of sequential solidification. 4, improper coating or coating falling off; 5, pouring temperature is too high; 6, pouring speed is too fast; 7, casting cooling is too slow; 8, casting burrs are too large. Prevention methods: 1. Set risers at thick parts of castings. The size and height of risers should be appropriate to achieve final solidification and improve the risers

11-12

2014

Zero whole than down? Some car companies play "civet cat for prince"

After a wave of antitrust investigations, are domestic auto parts prices really falling? A few days ago, the Insurance Industry Association of China and the China Automobile Maintenance Industry Association jointly released the second batch of 36 common models of zero-to-whole ratios, which is also six months later, the two associations once again released to the outside world the ratio of domestic parts prices to vehicle prices. The results show that Renault Coreau has the highest zero-to-whole ratio of 719.75 among the newly released 18 models. In the first batch of 18 models of data, although the zero-to-whole ratio has declined significantly, consumers have not gained real benefits through methods such as falling and rising. This also led to the elimination

11-07

2014

Application of bio-based materials-tomato skins to make auto parts

After announcing in the middle of the year that it would cooperate with Heinz to study the use of tomato skins to make auto parts, Ford Motor (China) Co., Ltd. demonstrated its broader application prospects for bio-based materials at a green technology event in Beijing on the 23rd. Pan Anbo, director of materials engineering at Ford Motor (China), told reporters that Ford has further increased its use of bio-based materials this year. Taking Mondeo as an example, the front and rear doors are made of kenaf fiber reinforced materials. Compared with traditional materials, the use of this material can reduce the weight of parts by more than 30%, and each car can lose about one kilogram. Other bio-based materials include, cellulose-based center console elements

10-31

2014

Master the ten steps car owners do it yourself to replace the car spare tire

Tire punctures, air leaks or flat tires will cause the car to break down on the road. Many times you will find that when you don't need something, it will frequently appear in your field of vision, and when you urgently need it, You can't find it. Tire punctures, air leaks or flat tires will cause the car to break down on the road. Many times you will find that when you don't need something, it will frequently appear in your field of vision, and when you urgently need it, You can't find it. When your tires are flat while driving on the road, it is very difficult for you to find a place to gas or repair the tires. If you call for help,

10-23

2014

Car turbocharging modification increases power by 30%-50%

For example, an ordinary 2.0 engine can produce 110-147kw of power. If a turbocharger is installed, 220KW of power can be generated. This is definitely not false data, it is actually measured by us, that is to say, after modifying the turbocharger, it will definitely increase the power by 30%-50% compared to before. Car turbocharging modification increases the power by 30%-50%. From the perspective of increasing the power of the car engine, modification of turbocharging is the best way, but it is usually used in terms of turbo capacity, boost value or A/R value. More conservative settings. Right.

10-23

2014

Auto Parts Channel Monopoly Breaks Online Can Buy Original Parts

Sina Auto News On September 18, 2014, 10 departments including the Ministry of Transport, the National Development and Reform Commission, the State Administration for Industry and Commerce, the General Administration of Quality Supervision, Inspection and Quarantine, and the China Insurance Regulatory Commission jointly issued the Guiding Opinions on Promoting the Transformation and Upgrading of the Automobile Maintenance Industry and Improving Service Quality, which will be officially implemented on January 1 next year. The opinions clearly put forward the relevant requirements of "allowing authorized parts distribution enterprises and authorized maintenance enterprises to resell original parts to unauthorized maintenance enterprises or end users", "automobile production enterprises should disclose automobile maintenance technical data to authorized maintenance enterprises and independent operators" to break the monopoly of auto parts channels, and

09-22

2014

European auto parts manufacturers support anti-monopoly in China's auto industry

In the early morning of September 10, Beijing time, the European Union Chamber of Commerce (TheEuropeanUnionChamberofCommerceinChina) in China, which represents the interests of more than 100 European auto parts manufacturers and related companies, said on Tuesday that the Chamber of Commerce supports the Chinese authorities in cracking down on market monopolies and requires automakers to relax their rights. Measures to control the sales of auto parts in China, and said that the Chinese government should use the anti-monopoly law to help consumers lower the prices of related products. The European Chamber of Commerce in China says automakers control China's parts market and other aftermarket services

09-10

2014

< 12 > proceed page

SAF Coolest v1.3 设置面板XXDSX-ZTPO-FWZFE-ZEF

无数据提示

Sorry, the current column has no content for the time being.!

You can view other columns or returnHome Page

V1.3.1 SVG图标库请自行添加图标,用div包起来,并命名使用