Master the ten steps car owners do it yourself to replace the car spare tire

Release time:

2023-09-15 14:31

Tire punctures, air leaks or flat tires will cause the car to break down on the road. Many times you will find that when you don't need something, it will frequently appear in your field of vision, and when you urgently need it, You can't find it.

Tire punctures, air leaks or flat tires will cause the car to break down on the road. Many times you will find that when you don't need something, it will frequently appear in your field of vision, and when you urgently need it, You can't find it.

When your tires are flat while driving on the road, it is very difficult for you to find a place to cheer up or mend the tires. If you call for help, time will allow. If you happen to be on the highway, it will be more troublesome. It's better to do it yourself. Learn one more skill, which is much faster than asking for help. Besides, it's not difficult to change the spare tire.

First, you have to find a safe place. When the tires are flat, the car can still drive. Therefore, you have to drive the car to the side of the road. It is best not to change it on the road. This will prevent any "big head green" from driving distracted and picking you who are repairing the car on the road. Then, make sure you can find the jack, the wrench to remove the tire nut, and the spare tire. Collect these and start changing the spare tire.

1. Pull up the parking brake and pull it tighter to avoid the car moving back and forth.

2. Use a wrench to loosen the nuts of the flat tires one by one. Generally, turning counterclockwise is to loosen the nuts. Just loosen it, don't screw it off.

3. Jack, first find the steel fulcrum next to the flat tire, not on the lower edge of the car door. This fulcrum should generally be about 10cm away from the outer edge. Just make sure it is a steel frame and put the jack below.

4. Raise the jack. Pay attention to when raising the jack, the jack should be upright and not inclined, otherwise the jack should be lowered and the body should be lowered again.

5. After the flat tire is suspended, stop raising the jack, and then use a wrench to unscrew the loosened nuts one by one.

6. Hold the flat tire with both hands and remove the tire firmly. If you can't move it out, you can jump over the outer edge of the tire with your foot, the whole wheel will loosen, and then take it off.

7. Hold the spare tire and install it on the wheel hub. When installing it, the nut hole of the wheel should be aligned with the nut hole on the wheel. This will take some time, just be patient.

8. Then screw the tire nut in by hand, and then screw the nut one by one with a tire wrench. You don't need to use great effort, just screw it to the end.

9. After all the nuts are screwed to the end, Zu slowly put down the jack and let the spare tire powder ground.

10. At this time, don't forget to tighten the nut with the tire wrench again. If your strength is not very big, then use all your strength to tighten it. If you have wide arms and round waist, it is enough to use your 80% strength.

SAF Coolest v1.3 设置面板XXDSX-ZTPO-FWZFE-ZEF

无数据提示

Sorry, the current column has no content for the time being.!

You can view other columns or returnHome Page

V1.3.1 SVG图标库请自行添加图标,用div包起来,并命名使用